Find Terex Trucks, Construction Machinery Parts, Mining Machinery Parts on Industry Directory, Reliable Manufacturer/Supplier/Factory from China.

Inquiry Basket (0)

heavy dute rigid body mining dump truck 50 ton for sale

Basic Info

Model No.: 50ton dump truck, TR50

Product Description

 

Product Description

 

    heavy dute rigid body mining dump truck 50 ton for sale  
1, compatitive price and good quality
2,more than 5 years after service

3,Best service

 

Cummins turbo charged, aftercooled engine
Smooth shifting, electronically-controlled transmission
Non-wearing hydrodynamic retardation
High visibility cab with de-luxe interior
Maximum Payload-45 tonne (50 US ton)
Maximum Gross Vehicle Weight-80 000 kg (176 366 lb)
Heaped Capacity-27.5 m 3 (36 yd 3 )
Gross Power-392 kW (525 hp)  

 

 

Fabricated Full box section frame with integral front bumper and
closed loop crossmember. Crossmember and rear torque tube and
tail seat connections with frame rails are high strength alloy castings.
Standard: Front and Rear 21.00-35(36PR) E-4
Rim Width .......................................................................... 15 in
Consult tyre manufacturers for optimum tyre selection and correct
t- km/h (ton-mile/h) capacity for application.
SERVICE-Dual shoe external expanding, mechanically actuated by
air pressure. Independent front and rear systems actuated by single
treadle valve with auxiliary manual control. Operator controlled wet /
dry road valves reduces front brake pressure 50% for improved control
and slippery conditions.
Front Linings: Diameter x width .............................. 660 x 127 mm
................................................................. (26 x 5 in)
Lining area: front axle ........................................ 3 980 cm 2 (617 in 2 )
................................................................. (26 x 5 in)
Rear Linings: Diameter x width ............................... 660 x 254 mm
............................................................... (26 x 10 in)
Lining area: front axle ..................................... 7 960 cm 2 (1 234 in 2 )
Total Lining Area: ........................................ 11 940 cm 2 (1 851 in 2 )
EMERGENCY-Warning light in cab indicates when air pressure drops
below 550 kPa(80 lbf/in 2 ). Front and rear brakes automatically actuate
if ystem air pressure falls to 310 kPA(45 lbf/in 2 ).
Air compressor capacity:.................................. 8.8 litres (12 ft 3 /min)
Total safety brake air reservoir capacity ............ 81 litres (4 950 in 3 )
PARKING-service brakes act as parking brakes when applied by
manual control valve on the instrument panel.
RETARDATION-Application of non wearing hydrodynamic retarder
ntegral with transmission.
Independent hydrostatic steering with closed- centre steering valve,
accumulator and pressure compensating piston pump.
Accumulator provides uniform steering regardless of engine speed. In
the event of loss of engine power it provides steering of approximately
two lock-to-lock turns.
A lowpressure indicator light warns of system pressure below 83 bar
(1 200 lbf/in 2 ). Steering conforms to ISO 5010, SAE J53.
Steering conforms to ISO 5010, SAE J53.
Maximum Tyre Steering Angle.................................................39 ?
Two body hoist cylinders are mounted between the frame rails. Cylinders
are two-stage with power down in the second stage. The body hydraulic
system is independent of the steering hydraulic system.
System Pressure........................................... 190 bar (2 750 lbf/ in 2 )
Body Hydraulic Pump Flow Rate
@ 2 100 rev/ min.............................210 litre/ min (55.5 US gal/min)
Body Raise Time........................................................... 13 Seconds
Body Lower Time ............................................................ 9 Seconds
Longitudinal 'V' type floor with integral transverse box-section stiffeners.
The body is exhaust heated and rests on resilient impact absorption
pads full time exhaust is optional.
Body floor wear surfaces are high hardness abrasion resistant steel of
yield strength.
ROPS Cabguard SAE J1040 Feb 86. ISO 3471
Thickness: Floor .................................................... 15 mm (0.59 in)
Side...................................................... 10 mm (0.39 in)
Front, lower .......................................... 10 mm (0.39 in)
Volumes: Struck (SAE) ......................................21.5 m 3 (28.1 yd 3 )
Heaped 2: 1 (SAE) ...............................27.5 m 3 (36 yd 3 )

 

 

 

 

 

 

 

 


 

 

since the company's establishment our products are famous for good-qualityand profession.The advantages as follows:

 

 1.Applied to Terex self-dumping tracks  

2.High Quality and Reasonable Price for mining dump truck for sale

3.Quick and Safe Delivery

4.Many Different Kinds of Products, In the line with the TEREX global standards.

5.Sample Order Accept

 

 

 

Packaging & Shipping

 

Packaging Details: according to customers' needs
Delivery Detail: 30-35days after confirming the order

 

 

 

 

Our Services

 

1.We have more than 7 years experience in off-road heavy dump trucks

 

2.Excellent quality control is one of our main principles

 

3.Various style for each products and completely series pneumatic products for you to choose 

 

4.Sample order & small quantity order is ok

 

 

If you have any question, please get in touch with us promptly

 

 

 

Company Information

 

 

 

 

Dear customers,welcome to our website.

 

Because there are thousands of products, in order to offer you good service, please kindly tell us the P/N(Part Numer). If you have no P/N, you can aslo tell us the ESN(Engine series Number) or vehicle type which you can find on nameplate of Cummins engine and Terex vehicle.

 

Product Categories : Terex Trucks

Email to this supplier
  • *Subject:
  • To:

  • *Messages:
    Your message must be between 20-8000 characters